Maintenance of Bar Chair
- Mar 18, 2018 -

    The biggest advantage of a solid wood bar chair lies in its natural wood grain and its varied natural colors. Since solid wood is an organism that constantly breathes, it is recommended that it be placed in an environment that is comfortable in temperature and humidity, and that beverages, chemicals, or overheated objects must be placed on the surface to avoid damaging the natural color of the wood surface. If it is Metonai board material, when the dirt is heavy, it is recommended to use a diluted neutral detergent with warm water first wipe once, then wipe with clean water, remember to wipe off the water stains with a soft dry cloth, to be completely wiped After using the maintenance wax to polish, even if you're done, you only need to pay attention to daily cleaning and maintenance to make the wood furniture last.

    After purchase, the fabric bar stools are sprayed once with a fabric protector for protection. Fabric Bar Chairs can be beaten regularly with a dry towel and vacuumed at least once a week, with particular attention to removing dust from the structure. When the surface of the fabric is stained, use a clean cloth dampened with water to wipe it from the outside to the inside or use a fabric cleaner according to instructions. Avoid sweat, water and dust on the sofa. It is suggested that most of the linings and seat cushions of the fabric bar stools should be divided into hand and machine washing. It should be ascertained to the furniture manufacturer because some of them may have special washing requirements. If you find a loose end, you can't tear it off by hand, and use a pair of scissors to cut it evenly. All cloth covers should be cleaned by dry cleaning. Do not wash and do not bleach.

     The electroplating base bar chair should not be placed in a damp place. Do not wipe it with a damp cloth. In particular, do not scrub it with soapy water or detergent powder. The base part should avoid contact with substances such as hydrochloric acid, salt, and salt halide, and should not be placed in the smoke-smoked place. Rusty parts of the plated base can be applied to the rust with a brush or a cotton gauze. After about 10 minutes, wipe it back and forth several times to remove rust.


Anji Tengfei Furniture Factory

Add: Baishuiwan Village, Tianhuangping Town, Anji County, Huzhou, Zhejiang, China (Mainland)

Tel: 86-572-5338737

Mob: 86-15088378828

Fax: 86-572-5245837

Email: sale1@anjitf.com