Analysis Of The Grinding Process Of Cany Chair
- Oct 25, 2017 -

Raw material grinding, the surface of the vine is more rough, is a prickly plant, so in the production, the raw materials should be "polished" treatment. This kind of polishing machine tool, is specially to the rattan raw material grinds the tool, mainly uses the sand belt and the grinding wheel to grind. Grinding to be divided into two times to complete, once is coarse grinding, once is fine grinding.Cany chair

This is often used in the production of rattan cane tools: muskets, high-pressure air cooling guns, console. The setting of the console is simple, but it is useful, and it is the main tool to make the cane bend. On the console, there are 2 iron cylindrical cylinders with diameters of 8 cm and 25 centimeters fixed on top, and two iron cylinders spaced between 10 centimeters. The process of bending the vine is done on this platform.Cany chair

Our assembly is mainly assembled with wicker handrails, ship parts, ship trays and ship support rods, which can be assembled in half a rocking chair. Before assembling, we still have to finish polishing these parts, the polishing method is the same as before, here no longer tells.Cany chair The tools used for assembly are the No. 5th drill, electric screwdriver and No. 5th Screw. This is our final assembly of the shape, because this part of the assembly of the relatively simple technology, we will no longer elaborate, with the drill in these marks at the hole, each point dozen two holes, and then use the same type of screws to be fixed on it, so that we do a good half of the rocking chair.Cany chair 

Just the same way the other half of the rocking chair can be made. The rocking chair is a kind of furniture embodying the comfortable leisure life, which integrates the shape and function, technology and materials, and has a highly unified value and practicality. Rattan Rocking chair Since ancient times, even in today's furniture industry, rattan rocking chair is still a fashion furniture.Cany chair